KR  EN 

전체상품목록 바로가기

본문 바로가기


    Keynote
    Keynote

    • Product Name : 신경식

      • Overview :

        Prof. Kyungsik Shin ㅣ Conference 5 Smart Manufacturing Innovation and Business

        Title
        Business Comes from the Power of Big Data.
        Date and Place
        April 3 (Fri.) 2020 | 13:30 ~ 14:30 | KINTEX 1, 3F, Grand Ballroom
        Session
        The use of high technology is diversifying in the era of the fourth industrial revolution. Big data is fast reaching us! Its use is endless. Now that innovation in manufacturing is important, let's explore ways to put big data into practice with a fundamental understanding of manufacturing innovation.
        Biography
        - 2019~ Outside Director at KB Kookmin Card
        - Honorary President at The Korean Association for Intelligent Information Systems
        - President at The Korean Association for Intelligent Information Systems
        - Director at Electronic Trade Association of Korea
        - Director at The Korean Association for Intelligent Information Systems
        - Director at The Korean Knowledge Business Association
        - Innovation Advisory Committee at Korea Smes And Startups Agency

    • Product Name : 이순열

      • Overview :

        Soonyeol Lee Head of Hyundai Robotics Division ㅣ Conference 5 Smart Manufacturing Innovation and Business

        Title
        Applying AI-based Robotics Technology for Autonomous Factories.
        Date and Place
        April 3 (Fri.) 2020 | 10:50~11:30 | KINTEX 1, 3F, Grand Ballroom
        Session
        Smart factories using AI technology will evolve into autonomous factories that respond immediately to minor changes in customer orders, work environments, materials, and plant conditions. The following introduces the evolution and application of cognitive technology and data-based intelligent robot technology.
        Biography
        - Former President, Fieldbus Foundation Korea Marketing Association
        - Former Member, The Industrial-Academic Network Forum, The Korea Institute for Industrial Technology Promotion
        - Former Executive Director, Rockwell Automation Korea
        - Former Chairman, ODVA TAG Korea

    • Product Name : Thomas Schmid

      • Overview :

        Thomas Schmid Siemens Korea, Head of Digital Industries ㅣ Conference 3 Smart Manufacturing Innovation and the Future of the Manufacturing Industry

        Title
        The Direction of Manufacturing Innovation with Digitalization
        Date and Place
        April 1(Wed.) 2020 | 10:50~11:30 | KINTEX 1, 3F, Grand Ballroom
        Session
        Currently, many countries around the world are seeking the digitalizing of manufacturing into smart manufacturing innovation ways. The importance of digitalization is growing even more as the manufacturing industry places an emphasis on customer-focused thinking centered on smart factory and real-time communication with customers as a result of the change in understanding in manufacturing. The following talks about how manufacturing should innovate with the help of digitalization in the 4th Industrial Revolution Era.
        Biography
        - 1962 Born in Lauingen, Germany
        - Technical University of Munich (Dipl. - Ing. Univ, Electrical Engineering)
        - 2020Head of Digital Industries in Siemens Ltd. Seoul
        - 2018Senior Vice President and Head of Sales Consulting Digital Factory Sales in Siemens AG
        - 2012Senior Vice President Projects in Siemens AG
        - 2011Senior Vice President and Head of Industry Sales in Siemens Ltd. China
        - 2010Senior Vice President and Head of Industry Product & System Sales in Siemens Ltd. China
        - 2008 Senior Vice President and member of the General Management Team in Industry IA & DT Divisions
        - 2004 Senior Vice President and Head of Sales Region Automation & Drives in Siemens AG
        - 2002 Senior Vice President and Corporate Officer in Yaskawa Siemens Automation & Drives Corp.
        - 1988 Joined in Siemens AG, worked as a project manager and filled in several management position
    • Product Name : 송재복

      • Overview :

        Prof. Jaebok Song ㅣ Conference 5 Smart Manufacturing Innovation and Business

        Title
        Technology and Industry Trends Collaborative Robots
        Date and Place
        April 3 (Fri.) 2020 | 10:10~10:50 | KINTEX 1, 3F, Grand Ballroom
        Session
        Collaborative robots are safe for workers and robots to collaborate in a shared space and perform various tasks through intuitive teaching without complex programming. Therefore, they can be easily used in small-medium businesses and service industries where space is small and there is no robot expert. This lecture examines the current technology of the collaborative robots and their applications to industrial sites. In addition, it introduces a technology that can greatly increase the payload of a robot or reduce the use of energy by using mechanical counterbalancing techniques.
        Biography
        BS, Dept. of Mechanical Eng., Seoul National Univ. (1983)
        Ph.D., Dept. of Mechanical Eng., MIT (1992)
        Professor, School of Mechanical Eng., Korea Univ. (1993~)
        Director, Intelligent Robotics Research Center, Korea Univ. (2004 – 2015)
        Editor-in-Chief, IJCAS (SCIE Journal) (2011 – 2013)
        Member, Nat‘l Academy of Engineering of Korea (2013~)
        President, Korea Robotics Society (2014)
        President, Korean Society of Mechanical Engineers (2020)
        Awards
        Presidential Citation of Korea Robot Awards (2016)
        Best Paper Award by Korean Fed. of Sci. & Tech. Society (2010, 2014)
        Top 10 Mechanical Technologies of the Year (2017)
        Academic Award by Korea Robotics Society (2018)
        Industrial Technology of the Month by MOTIE (2018)

    • Product Name : 백만인

      • Overview :

        Manin Back Director of Center ㅣ Conference 2 3D Printing & Molding Technology for Smart Manufacturing Innovation

        Title
        The Present and Future of the Mold & Die
        Date and Place
        April 1 (Wed.) 2020 | 14:35~15:05 | KINTEX 2, 3F, 301 & 302
        Session
        In time for the 4th industrial revolution, Directions for tooling system and molding system (Manufacturing intelligence / Automation)
        Biography
        2015 Winner of the Jang Young-shil Award (Air Conditioning function components applied with the chemical ultrafine spray injection technology)
        2016 ~ 2017 Head of LG Electronics' Molding Technology Development Office
        2018 ~ 2019 Director of LG Electronics' Molding Technology Center


    • Product Name : 박한구

      • Overview :

        Hankoo Park Director ㅣ Conference 4 4th Industrial Revolution and Global Manufacturing Innovation

        Title
        Smart Factory that We Encounter
        Date and Place
        April 2 (Thu.) 2020 | 11:00~12:10 | KINTEX 1, 3F, Grand Ballroom
        Session
        There are many backgrounds in how Smart Factory emerges in society. It needed a new manufacturing system to prevent the various environmental changes such as global financial crisis / low growth, slowing consumption due to high unemployment, and lack of skilled workers due to aging. With the development of high technology, Smart Factory has begun to spread, and it has long been a prerequisite for manufacturing innovation in Korea’s manufacturing industry. Smart Factory has undergone some changes and we will be able to see what Smart Factory will look like in the future.
        Biography
        - Former President, Korean Industry 4.0 Association
        - Former CEO, Smart M&F Group
        - Former Director POSCO ICT

    • Product Name : 권병칠

      • Overview :

        Byoungchil Kwon Vice President ㅣ Conference 2 3D Printing & Molding Technology for Smart Manufacturing Innovation

        Title
        Strengthen competitiveness of Mold Industry by Smart Factory
        Date and Place
        April 1 (Wed.) 2020 | 14:00~14:30 | KINTEX 2, 3F, 301 & 302
        Session
        Paradigm shift in mold making through smart management and smart manufacturing.Providing future direction of mold factory with automatic mold design, unified & integrated data management, free- polishing, automatic welding, and digital inspection system for data-based manufacturing conversion from manual work.
        Biography
        1. Graduate Hanyang Univ.(1989)
        2. Enter the Hyundai Motor Company (1989)
        3. Team leader of Body Part Engineering Team (2014)
        4. Group Leader of HYUNDAI TOOL ENGINEERING (2015~) Electronics, South Korea
        March 1983 - June 1985, Obligatory Service in the Korean Army


    • Product Name : 고산

      • Overview :

        Ko San CEO ㅣ Conference 2 3D Printing & Molding Technology for Smart Manufacturing Innovation

        Title
        Why on-line manufacturing platform?
        Date and Place
        April 1 (Wed.) 2020 | 13:15~13:55 | KINTEX 2, 3F, 301 & 302
        Session
        The rise of the manufacturing platform companies has been the hot and soon will be hottest issue in the manufacturing industry. This talk will cover why manufacturing platform is so important for Korean manufacturing industry and which global players are the most prominent in the market.
        Biography
        Mr. San Ko studied mathematics and cognitive science for his B.S and M.S degree respectively in Seoul National University. While working at the SAIT(Samsung Advanced Institute of Technology) as a researcher in AI, he was selected as one of the first two astronauts by KARI(Korea Aerospace Research Institute) and trained in Russia. After that, Mr. San Ko pursued further study in HKS(Harvard Kennedy School of Government) and came back to Korea to found TIDE Institute - an NPO helping startups and entrepreneurs. In 2014, Mr. San Ko founded ATEAM Ventures which provides on-line manufacturing platform – ‘Creatable’ in South Korea.

    • Product Name : 송형권

      • Overview :

        Song Hung Co-founder ㅣ Conference 3 Smart Manufacturing Innovation and the Future of the Manufacturing Industry

        Title
        Smart Factory and the 4th Industrial Revolution
        Date and Place
        April 1(Wed.) 2020 | 13:30~14:30 | KINTEX 1, 3F, Grand Ballroom
        Session
        - Smart Factory and the 4th Industrial Revolution
        - How Korea manufacturers can sustain the global competitiveness
        - What talents are needed and how to nurture them.
        Biography
        - Doctor of Computer Science
        - Korea Industry 4.0 Association, Co-Founder, 2015.10 ~ present
        - Centios, KT and Cisco joint venture, CEO, 2012. 02. ~ 2014. 03.
        - Samsung Electronics, Network Systems Division, VP, Global Marketing and Business Development, 2000. 02. ~ 2012. 02.
        - U S West, Manager, 1994. 07. ~ 2000. 02.
        - Bellcore, 1988. 11. ~ 1994. 07.
        - AT&T Bell Labs, 1984. 06. ~ 1988. 11.

    • Product Name : Masahiko Mori CEO

      • Overview :

        Masahiko Mori CEO ㅣ Conference 4 4th Industrial Revolution and Global Manufacturing Innovation

        Title
        How the Global Manufacturing Corporations are Innovating in the Era of Fourth Industrial Revolution
        Date and Place
        April 2 (Thu.) 2020 | 10:10~11:00 | KINTEX 1, 3F, Grand Ballroom
        Session
        The fourth industrial revolution demands innovation in manufacturing. The innovation arisen from robot cooperation to the smart factory will foresee a huge change in manufacturing. Then‘HOW’are the global manufacturing corporations coping with this innovation? The following discusses the cases of innovation in the global manufacturing corporations and how we need to deal with it.
        Biography
        - Masahiko Mori CEO
        - Japan Machine Tool Builders Association, Vice-President
        - Kyoto University Innovation Capital, President
        - Graduate School of Advanced Leadership Studies, Kyoto University, Professor

    • Product Name : 형원준

      • Overview :

        Wonjoon Hyoung CDO ㅣ Conference 1 Digital Twin for Smart Manufacturing Innovation

        Title
        Doosan’s Digital Transformation Journey, Digital Twin Strategy and Vision
        Date and Place
        March 31(Tue.) 2020 | 15:25~15:55 | KINTEX 2, 3F, 301 & 302
        Session
        Introducing Digital Transformation Journey of Doosan to design customer experiences with the best digital talent.
        Biography
        Won-Joon Hyoung is leading Doosan’s groupwide Digital Transformation as a CDO and a CIO. He is also head of Doosan Information & Communications BU. Dr. Hyoung was highly recognized for his contribution to the spread of Design Thinking in Korea and excellent leadership and business performance while serving as CEO & president of SAP Korea for approximately 10 years since 2008. Prior to joining SAP, Hyoung led successful business innovation of a leading global company, as President of i2 Technologies, Inc., Korea and Greater Asia-Pacific Region, for 5 years.


    • Product Name : 김진형

      • Overview :

        Chair prof. Jin-Hyung Kim ㅣ Conference 3 Smart Manufacturing Innovation and the Future of the Manufacturing Industry

        Title
        How does ‘Innovation’ Work in Smart Era?
        Date and Place
        April 1(Wed.) 2020 | 10:10~10:50 | KINTEX 1, 3F, Grand Ballroom
        Session
        In the 4th Industrial Revolution, smart technology is more likely to advance in a situation where the machine replaces or help humans. With the accelerating development of artificial intelligence among the technologies, the following deals with how AI can influence the manufacturing and how the innovation of manufacturing can be achieved through this.
        Biography
        - Professor Emeritus, KAIST
        - Ph.D., Aritificial Intelligence field in Computer science, UCLA
        - Former President, Artificial Intelligence Institute
        - Former Director, Software Policy & Research Institute

    • Product Name : 주영섭

      • Overview :

        Youngsup Joo Chairman ㅣ Conference 1 Digital Twin for Smart Manufacturing Innovation

        Title
        Smart Manufacturing Innovation and Digital Twin
        Date and Place
        March 31(Tue.) 2020 | 13:40~14:00 | KINTEX 2, 3F, 301 & 302
        Session
        This keynote speech will present the strategic direction of the Smart Manufacturing Innovation based on the digital transformation and will also discuss the application of the digital twin in the context of CPS(cyber physical system).
        Biography
        Present) Distinguished Professor, Korea Univ. / Chairman, Korea ICT Convergence Network / Senior Member, National Academy of Engineering of Korea
        Former) SME Minister of Korea / Member, National Economic Advisory Council / Professor, Seoul National Univ. / Managing Director, Office of Strategic R&D Planning & Ministry of Knowledge Economy / President & CEO, Hyundai Autonet / President & CEO, Bontec / Asia Pacific President, GE Thermometrics

    • Product Name : Prof. Dr.-Ing. Berend Denkena

      • Overview :

        Prof. Dr.-Ing. Berend Denkena ㅣ Conference 6 Revolutionary Digital Era of Machine Tools I

        Title
        Intelligent Components for Autonomous Machine Tools
        Date and Place
        April 2(Thu.) 2020 | 17:20~18:00 | KINTEX 2, 3F, 301 ~ 308
        Session
        Today's production with customized and specialized machine tools is often unable to achieve this requirement. As a result, autonomous systems that provide more flexible automation and more production freedom, while still maintaining high productivity and robustness regardless of lot size, are needed. Autonomous machine tools have the ability control the production themselves. In addition, the machine tools are able to adapt to unforeseen changes during the process. The basis for this are intelligent components with sensory and actuator capabilities.
        Biography
        Prof. Berend Denkena is Head of the Institute of Production Engineering and Machine Tools at the Leibniz Universität Hannover. After obtaining doctorate at the Faculty of Mechanical Engineering at University of Hannover in 1992, he worked as a design engineer and head of various development groups for Thyssen Production Systems in both Germany and the United States. From 1996 to 2001, he was Head of Engineering and Turning Machine Development at Gildemeister Drehmaschinen in Bielefeld. Since 2001, he has been full professor of Production Engineering and Machine Tools and director of the Institute of Production Engineering and Machine Tools at Leibniz University Hannover.

    • Product Name : yusuf

      • Overview :

        Prof. Yusuf Altintas ㅣ Conference 6 Revolutionary Digital Era of Machine Tools I

        Title
        Digital Machining Twin for Smart Machine Tools
        Date and Place
        April 2(Thu.) 2020 | 10:10~11:00 | KINTEX 2, 3F, 301 ~ 308
        Session
        The aim of digital machining research is to develop mathematical models of metal cutting operations, machine tool vibrations and control. The science-based digital models allow the virtual design, testing, optimization, monitoring and control of machine tools and machining operations. The model predicts the cutting forces, torque and power consumed in machining parts by considering CNC system dynamics, material properties, cutter geometry, structural flexibilities, and cutting conditions along the tool path. The simulation system predicts chatter-free cutting conditions within the work volume of the machine tool or detects the presence of chatter vibrations along the tool path. An in-house developed virtual and real-time CNC system allows the design and analysis of any five-axis machine tool controller. Current research includes digital twin approach, where virtual simulation and real-time machine tool monitoring are integrated to achieve intelligent, self-adjusting smart machine tools.
        Biography
        Professor Altintas worked as a machine tool and manufacturing process development engineer in industry before joining The University of British Columbia in 1986. He conducts research on metal cutting, machine tool vibrations, control and digital machining. He has published about 200 archival journal and 100 conference articles with over 27,300 citations with h index of 87 (Google Scholar), and a widely used “Manufacturing Automation: Principals of Metal Cutting Mechanics, Machine Tool Vibrations and CNC Design. His research laboratory created advanced machining process simulation (CUTPRO), virtual part machining process simulation (MACHPRO) and open-modular 5 axis CNC system (Virtual CNC), which are used by over 300 companies and research centers in the field of machining and machine tools worldwide.
        Professor Altintas is the fellow of Royal Society of Canada, CIRP, ASME, SME, CAE, EC, Tokyo University, P&WC, AvH and ISNM. He received Pratt & Whitney Canada’s (P&WC) university partnership (1997), APEG BC’s Meritorious (2002), APEG BC R.H. McLachlan (2010), UBC Killam Teaching Prize (2011), Gold Medal of Engineers Canada (2011), SME Albert M. Sergent Award (2012), NSERC Synergy Award, ASME Blackall best journal paper award, the scientific award of Turkey in Science and Engineering (2013), Georg Schlesinger Production Engineering Award (Berlin, 2016), and ASME William T. Ennor Manufacturing Technology Award (USA, 2016). He holds an Honorary Doctorate Degrees from Stuttgart University (2009) and Budapest University of Technology (2013), and holds Honorary Professor titles from BEIHANG University in Beijing and University Chair Professor from National Chung Hsing University-Taiwan. He was the past president of CIRP (International Academy of Production Engineering Researchers) for term 2016 – 2017. He is designated as the Distinguished University Scholar of Engineering at the University of British Columbia (2017). He currently directs NSERC CANRIMT Machining Research Network across Canada, and holds the NSERC – P&WC – Sandvik Coromant Industrial Research Chair Professorship to develop next generation Digital Machining Twin Technology.

    • Product Name : jun ni

      • Overview :

        Prof. Jun Ni ㅣ Conference 7 Revolutionary Digital Era of Machine Tools II

        Title
        Industrial AI and Its Applications to Smart Manufacturing
        Date and Place
        April 3(Fri.) 2020 | 10:10~11:00 | KINTEX 2, 3F, 301 ~ 308
        Session
        Artificial intelligence (AI) techniques have been successfully applied in various social and consumer applications, such as voice and image recognitions, social media, advertisement, etc. However, AI techniques have seen limited adoption in industry, primarily due to the difficulty in obtaining adequate sets of training data that are required by various machine learning or neural networks. This presentation will discuss the challenges of adopting AI techniques to industrial applications, and propose a concept of industrial AI (augmented intelligence). Furthermore, experienced operators or engineers accumulated significant knowledge or experience over their professional career. The value behind historical maintenance records should also not be overlooked. Additionally, when sensory data and algorithms are combined with the engineering models, human experience or expert knowledge, and historical records, a new paradigm of industrial AI (iAI) becomes a powerful solution to many industrial problems. Selected applications will be presented to demonstrate the value of this new iAI.
        Biography
        Dr. Jun Ni is the Shien-Ming (Sam) Wu Collegiate Professor of Manufacturing Science and Professor of Mechanical Engineering at the University of Michigan, USA. He served as the founding Dean of the University of Michigan – Shanghai Jiao Tong University Joint Institute located in Shanghai, China since 2006.
        Professor Ni has been invited to serve as a guest/advisory professor at many institutions, including Shanghai Jiao Tong University, Tsinghua University, Xi’an Jiao Tong University, Huazhong University of Science and Technology, Dalian University of Technology, and 10 other institutions. He served in the International Expert Advisory Board of the Ministry of Science and Technology of PRC to consult for the strategic planning in advanced manufacturing.

    • Product Name : 최재붕

      • Overview :

        Prof. Jaeboong Choi ㅣ Conference 1 Digital Twin for Smart Manufacturing Innovation

        Title
        Digital Innovation and Changes in the Digital Ecosystem
        Date and Place
        March 31(Tue.) 2020 | 14:35~15:15 | KINTEX 2, 3F, 301 & 302
        Session
        The Digital Transformation is changing the whole world. Market is changing and the entire eco-system is also changing. The speed is faster than ever. Many companies are suffering from the revolutionary transformation. Some people say that this is the 4th industrial revolution. And, the new era is coming due to the advance of digital technology such as AI, Robot, Driverless car, Iot etc. But they are not here yet.
        The presentation shows why the entire world is changing. The revolution started from the smart phone. The new human, so called Phono Sapiens, is the one who lead the revolutionary change. Phono Sapiens, who uses smart phone as a part of their organ, is now setting a new standard for human life.
        Phono sapiens live on the digital platform. So, every business model is moving toward digital platform. 10 world leading companies have changed their costumer into phono sapiens. and more than 5000 Billion dollars are invested into digital transformation. The B2C market has been attacked by the revolution. It's now coming to manufacturing industry. The presentation will show you the importance of digital platform, big data analysis, AI and how to adapt the digital transformation into your company.
        Biography
        - Business Model Designer
        - Professor of Mechanical Engineering, Service Design Inst. at Sungkyunkwan Univ.
        - Director of Human Centered Service Convergence Design Project Team (BK21 +) at Sungkyunkwan University
        - Director of SMARDI, Smart Design & Research Institute
        - Advisory Committee Member of Innovation Growth Headquarters at Ministry of Economy and Finance
        - Non-Standing Director of E-mart
        - Consultant of Special Committee for 4th Industrial Revolution at National Assembly
        - (Former)Advisory professor of E-mart24 Convenience Research Institute
        - (Former) Advisor of Samsung electronics DMC R&D Center
        - (Former) Member of Joint Committee for New Industry at Ministry of Trade, Industry and Energy
        - (Former) Member of Promotion Committee for ICT Internationalization Project at Ministry of Science, ICT and Future Planning
        - (Former) Safety Committee of Nuclear Safety and Security Commission
        - (Former) Head of Steering Group for Wearable Smart Device at Ministry of Trade, Industry and Energy

    Special
    Special

    • Product Name : 조승연 작가

      • Overview :

        Seung-Youn Cho ㅣ Conference 5 Smart Manufacturing Innovation and Business

        Title
        Industry 4.0 and the Future of Manufacturing in the View of a Humanist
        Date and Place
        2020. 4. 3(Fri.) | 15:50 ~ 16:50 | KINTEX 1, 3F, Grand Ballroom
        Session
        Biography

    • Product Name : 유영만

      • Overview :

        Prof. Young-Man Yoo ㅣ Conference 4 4th Industrial Revolution and Global Manufacturing Innovation

        Title
        Human Intelligence Surpasses Artificial Intelligence: conduct with wisdom, not with knowledge.
        Date and Place
        April 2 (Thu.) 2020 | 15:40~16:40 | KINTEX 1, 3F, Grand Ballroom
        Session
        Research the age of artificial intelligence surpassing human intelligence, data and information accumulated by human intelligence, and what future competition that human intelligence needs to perform to accumulate and develop the experiential wisdom that artificial intelligence cannot imitate more than the knowledge.
        Biography
        - BS, College of Education, Hanyang University
        - MS, Education, Hanyang University
        - Ph.D., Educational Engineering, Florida State University
        - Current Professor & Knowledge Ecology Scholar, Hanyang University
        - Wrote about 80 books
        - Appeared on tvN “No Way I’m an Adult, Sebasi Talk, and KBS “AM Plaza”

    • Product Name : 이재영

      • Overview :

        Chair Prof. Jae-Young Lee ㅣ Conference 3 Smart Manufacturing Innovation and the Future of the Manufacturing Industry

        Title
        Innovation of Luxury Brands Manufacturing: Imagination, Inspiration, Idea and Innovation
        Date and Place
        April 1(Wed.) 2020 | 15:30~16:30 | KINTEX 1, 3F, Grand Ballroom
        Session
        There are four keys in order to be a CEO of Luxury Brands: Imagination, Inspiration, Idea, and Innovation.
        They are the key things that the United States’ 16th President Abraham Lincoln preserved.
        The following discusses the qualifications for a Luxury Brands CEO who will lead the Smart Era Innovation.
        Biography
        - Chair Professor, POSCO
        - Ph.D., Atomic and Quantum Engineering, KAIST
        - Former Director, Future Technology and Computational Research
        - Former Director, Korea Atomic Energy Association (Daegu and Gyeongbuk)

    • Product Name : 김경일

      • Overview :

        Prof. Kyungil Kim ㅣ Conference 3 Smart Manufacturing Innovation and the Future of the Manufacturing Industry

        Title
        Ordinary Expert VS. Innovating Expert
        Date and Place
        April 1(Wed.) 2020 | 11:30~12:30 | KINTEX 1, 3F, Grand Ballroom
        Session
        A variety of qualifications are needed to achieve‘innovation’ in any field and whether ‘the expert’ who meets these qualifications exists or not can bring a big difference. What is different between the ordinary expert and innovating expert.
        Biography
        - Chairman, Game Culture Foundation
        - Former Executive Director, Central Psychological Surgeon Center
        - Former President, Korean Music Perception Society

    Expert
    Expert

    • Product Name : 임병훈

      • Overview :

        Byunghoon Im CEO ㅣ Conference 5 Smart Manufacturing Innovation and Business

        Title
        5G Era, Smart Manufacturing Innovation and Business Utilization
        Date and Place
        April 3 (Fri.) 2020 | 14:30~15:10 | KINTEX 1, 3F, Grand Ballroom
        Session
        In Smart Factory, the smartification of manufacturing facilities cannot be everything. Only when manufacturing facilities and information and communication technologies meet and carry out smart business will it be truly smart innovation in the manufacturing industry. The key to smart manufacturing innovation is to achieve efficiency by connecting markets and factories and organically connecting contracts, sales, and manufacturing to meet customer needs.
        Biography
        - Selected as a 'Respected Entrepreneur to Lead the Future' by the Ministry of SMEs and Startups in 2017
        - Selected as ‘Role Model of Small and Medium Business’ by the Ministry of SMEs and Startups in 2019

    • Product Name : Armin Kasper

      • Overview :

        Armin Kasper General Manager(Asia), MAPAL HiTECOㅣ Conference 3 Smart Manufacturing Innovation and the Future of the Manufacturing Industry

        Title
        Changes and Innovations in the Manufacturing Industry in the Industry 4.0
        Date and Place
        April 1(Wed.) 2020 | 11:30~12:30 | KINTEX 1, 3F, Grand Ballroom
        Session
        The revolving strength of the digital network – how bits and bytes change the metal cutting’s world.
        Biography
        In various positions at MAPAL since 1998, including as Sales Director and Vice President of subsidiaries.
        Responsible for business in Asia since 2013.
        Vice President Asia-Pacific and Member of the Board in Asian subsidiaries of MAPAL since February 2018.

    • Product Name : 최승보

      • Overview :

        Jacob Choi Technical Director ㅣ Conference 8 SIMTOS 2020 Technical Conference

        Title
        Enhancing 3D metrology process and application through robotic 3D scanning system.
        Date and Place
        April 1 (Wed.) 2020 | 16:00-16:30 | KINTEX 2, 3F, 308
        Session
        Improving efficiency with the fully automated 3D scanning system. Comparative analysis of small-medium parts before mass production via optimized system. Restoration of worn molds that causes production failures.
        Biography
        2016 ~ The present / Responsible for technical and domestic sales Dept.

    • Product Name : 한동원

      • Overview :

        Dong-won Han Sales Manager ㅣ Conference 8 SIMTOS 2020 Technical Conference

        Title
        Tebis: Small components process
        Date and Place
        April 1 (Wed.) 2020 | 10:10~10:40 | KINTEX 2, 3F, 308
        Session
        Introducing Tebis' advanced process for efficient parts processing. From CAD modeling to simulation to different CAD / CAM processes The efficiency of Tool and Die manufacturing can be maximized.
        Biography
        2008 ~ Sales manager of Tebis Korea distributor

    • Product Name : 백소령

      • Overview :

        Michelle, Baek Director ㅣ Conference 8 SIMTOS 2020 Technical Conference

        Title
        Additive manufacturing for smart factory
        Date and Place
        April 1 (Wed.) 2020 | 13:40 ~ 14:00 | KINTEX 2, 3F, 308
        Session
        Rapid prototyping technology, along with big data, A.I. and the Internet of Things, is 3D printer and additive manufacturing technology, simple handling robot technology is a collaborative robot or humanoid robot, and 4G is 5G and various element technologies are simultaneously exploding in 2010. We will examine the technologies, products, and cases of digital twin and digital thread to build a single flexible intelligent smart factory by converging these technologies with digital additive manufacturing technology and consider the Korean additive manufacturing for smart factory.
        Biography
        Director of printer sales,3D Systems Korea

    • Product Name : 김인명

      • Overview :

        Inmyeong Kim, CEO ㅣ Conference 8 SIMTOS 2020 Technical Conference

        Title
        Challenging to Future Manufacturing beyond prototyping
        Date and Place
        April 1 (Wed.) 2020 | 16:30 ~ 17:00 | KINTEX 2, 3F, 308
        Session
        Understanding of 3D Printing Technology SLM metal 3D Printing process DfAM & T.O Design - Applications for industries - Superior Productivity of SLM Technology
        Biography
        2008~: CEO of FusionTechnology Co., Ltd
        2004~2008: President of Materialise Korea Branch Office

    • Product Name : Jonathan Walter

      • Overview :

        Jonathan Walter TRUMPF GmbH / Area Sales Manager for Asia ㅣ Conference 4 4th Industrial Revolution and Global Manufacturing Innovation

        Title
        Industry 4.0 in daily operation in sheetmetal manufacturing
        Date and Place
        April 2 (Thu.) 2020 | 15:10~15:40 | KINTEX 1, 3F, Grand Ballroom
        Session
        TRUMPF has functioning solutions for his customers and brings individual smart factories to live together with his customers Which solutions TRUMPF can offer his customers from basic solutions to the entirely connected factory
        Biography
        Jonathan Walter holds a bachelor’s degree in international industrial management and a Master degree in Innovation Management. He has been working in Product Management for Smart Factory solutions and as Business Development Manager for Smart Factory solutions.
        Currently he has the position as Area Sales Manager for Asia.
        He has a broad experience in project management and in developing and implementing sales strategies.
        Over the last few years he has focused on the implementation of Smart Factory solutions across Asia.

    • Product Name : 최지연_영문

      • Overview :

        Ph.D Jiyeon Choi ㅣ Conference 4 4th Industrial Revolution and Global Manufacturing Innovation

        Title
        The Fourth Industrial Era and Global Manufacturing Innovation Cases that Laser Processing Technologies is Leading.
        Date and Place
        April 2 (Thu.) 2020 | 14:10~14:40 | KINTEX 1, 3F, Grand Ballroom
        Session
        Various laser processing technologies are being researched not only in the world but also in Korea. We will investigate the laser processing technologies that have been completed so that the technologies that were difficult to apply industrially can be used in the field and the examples of global manufacturing innovation in the 4th Industrial Revolution era.
        Biography
        - Head of research/Senior researcher, Optical Application Machine Laboratory, KIMM
        - Full-time professor, Nano Mechatronics, University of Science & Technology

    • Product Name : 이상호

      • Overview :

        Sangho Lee Director ㅣ Conference 4 4th Industrial Revolution and Global Manufacturing Innovation

        Title
        Global Innovation Cases with Collaborative and Industrial Robots
        Date and Place
        April 2 (Thu.) 2020 | 14:40~15:10 | KINTEX 1, 3F, Grand Ballroom
        Session
        Although it has not yet been commercialized, the development of 5G and Cloud Robotics will bring about significant changes in smart factories shortly. The automation of robots in factories due to the development of collaborative robots and industrial robots, which are the basis of this change, has already implemented smart factories. Based on cases of innovation in global smart factories that utilize collaborative robots or industrial robots, we are going to predict the future of manufacturing industries.
        Biography
        - Sales Director Group Leader, Marketing/Sales in Robot Business Department, ABB Korea
        - Former Engineer, PLC Motion Development Team, LG Industrial Systems Central Research Center

    • Product Name : 심풍수

      • Overview :

        Chair prof. PoongSoo Shim ㅣ Conference 3 Smart Manufacturing Innovation and the Future of the Manufacturing Industry

        Title
        The Future of Korea's Manufacturing Industry and Core Strategies for Development of Source Technology
        Date and Place
        April 1(Wed.) 2020 | 14:30~15:00 | KINTEX 1, 3F Grand Ballroom
        Session
        Compared with global powerful nations in the machinery industry, Korea is the last mover, so efforts and strategies must be followed to create a competitive machine tool in the world. The following talks about the direction of domestic machine tool companies' development to survive in the global division of labor and the development of technical and functional human resources to maintain competitiveness in the machinery industry.
        Biography
        - Professor, Industry 4.0 Center, Hanyang University
        - Machine Tools Installation Department, Hyundai Precision & Industries

    • Product Name : dieter klinke

      • Overview :

        Dieter Klinke Director ㅣ Conference 1 Digital Twin for Smart Manufacturing Innovation

        Title
        Where the digital twin meets tomorrow
        Date and Place
        March 31(Tue.) 2020 | 16:00~16:30 | KINTEX 2, 3F, 301 & 302
        Session
        The digital twin has long since established itself in industry, where it’s revolutionizing processes along the entire value chain. As a virtual representation of a product, production process, or performance, it enables the individual process stages to be seamlessly linked. This creates a consistent improvement in efficiency, minimizes failure rates, shortens development cycles, and opens up new business opportunities: In other words, it creates a lasting competitive edge.
        Biography
        Dieter Klinke is Director Marketing Asia Pacific for Siemens Digital Industry Software. He is 24+ years experiences in the Industry Software business in different positions and countries.

    • Product Name : 박동환

      • Overview :

        Donghwan Park Director of Center ㅣ Conference 2 3D Printing & Molding Technology for Smart Manufacturing Innovation

        Title
        Die & Mold New Technology of Automobile for Smart Manufacturing
        Date and Place
        April 1 (Wed.) 2020 | 15:45~16:15 | KINTEX 2, 3F, 301 & 302
        Session
        Understanding of the Fourth Industrial Revolution
        Paradigm Shift in the Mold Industry
        Latest press mold technology for Automobile
        Future economic mold manufacturing technology
        Example of Smart Manufacturing(Factory) Foundation
        Biography
        March 2007 – Present, Chief Researcher in Technology & Innovation Department, Gyeongbuk Hybrid Technology Institute, South Korea
        April 2004 - February 2006, Research Fellow in School of Engineering Systems, Gardens Point Campus, Queensland University of Technology, Australia
        February 2002 - February 2004, Chief Researcher in Steel Applications Research Group, Automotive Steels R&D Center, POSCO Co., Ltd., South Korea
        July 1995 - February 1999, Team Leader in Renault Samsung Motors, South Korea
        November 1987 - July 1995, Researcher in LG Electronics, South Korea
        March 1983 - June 1985, Obligatory Service in the Korean Army

    • Product Name : peter rogers

      • Overview :

        Peter Rogers Specialist ㅣ Conference 2 3D Printing & Molding Technology for Smart Manufacturing Innovation

        Title
        Leveraging software in the journey to AM mass production
        Date and Place
        April 1 (Wed.) 2020 | 15:10~15:40 | KINTEX 2, 3F, 301 & 302
        Session
        I will be speaking about the role of software in the additive manufacturing process, and how it can help companies take the technology to mass production volumes. The key points of focus will be Simulation, Design and Automation.
        Biography
        Autodesk Additive Manufacturing Product Specialist

    • Product Name : 정일용

      • Overview :

        Iilyoung Jung Director ㅣ Conference 2 3D Printing & Molding Technology for Smart Manufacturing Innovation

        Title
        Latest 3D Printing Technology for Smart Manufacturing, Additive Journey@GE
        Date and Place
        April 1 (Wed.) 2020 | 11:10~11:40 | KINTEX 2, 3F, 301 & 302
        Session
        Since 2012, GE has invested more than $2B in additive manufacturing. GE Aviation is producing more than 30,000 of fuel nozzles for the LEAP family of jet engines. The company is also building the Advanced Turboprop, the first commercial aircraft engine in history with a large portion of components made by additive manufacturing methods. The designers reduced 855 separate parts down to just 12. As a result, more than a third of the engine is 3D printed. GE's case study will show the status of additive manufacturing technologies
        Biography
        ILYONG, sales director at GE Additive, has various business experiences associated with CAD / CAM / PLM at IBM, Dassault Systemes and PTC. Through his experience, he shares the ideas with manufacturers on creating new business opportunities through Digital Transformation and Industries 4.0. At GE Additive, he believes that additive manufacturing, innovative and disruptive technology, will revolutionize the local manufacturing industry. He received bachelor’s degree in mechanical design and production engineering from Yonsei university.

    • Product Name : 조신후

      • Overview :

        Shinhu Cho Senior Research Engineer ㅣ Conference 2 3D Printing & Molding Technology for Smart Manufacturing Innovation

        Title
        Case study of 3D/4D printing technology in automotive industry
        Date and Place
        April 1 (Wed.) 2020 | 10:35~11:05 | KINTEX 2, 3F, 301 & 302
        Session
        3D printing, also known as additive manufacturing is the revolution of the field of manufacturing, since the 3D printing process can reduce the process time, materials, and costs. Highly customized products with complex geometry can be fabricated by using various types of 3D printers. 3D printers can build structures with up to tens of micrometers and high resolution in height. This technique has been already applied to several industries such as aerospace, bioengineering, dental service, electronics, automotive, architecture, and many others. In this presentation, I will introduce new technologies and study several cases where the additive manufacturing applied to the automotive industry.
        Biography
        Shinhu Cho is an senior research engineer at Hyundai Motor Company, where he researches 3D and 4D printing materials and systems. He majored in Mechanical Engineering in the University of Minnesota Twin-Cities for B.S degree in 2009. After that, he moved to Illinois and graduated from the University of Illinois at Urbana-Champaign with M.S and Ph.D degrees in Mechanical Science and Engineering in 2015. He has developed the stress wave mitigation system with new material composites which is called Geopolymer. He developed and applied the Geopolymer composites to the 3D printing and automotive industries since he joined the HMC. Furthermore, he is currently interested in 4D printing where the structure has additional transformation over time.

    • Product Name : 강민철

      • Overview :

        Mincheol Kang Executive Director ㅣ Conference 2 3D Printing & Molding Technology for Smart Manufacturing Innovation

        Title
        Technical Prospects and Market States of Metal Additive Manufacturing Industry
        Date and Place
        April 1 (Wed.) 2020 | 10:00~10:30 | KINTEX 2, 3F, 301 & 302
        Session
        AM has grown up from the early days of rapid prototyping, and as a dynamic field of study has acquired a great deal of related and redundant terminology. AM could revolutionize many sectors of manufacturing by reducing component lead time, material waste, energy usage, and weight saving. Furthermore, AM has the potential to enable novel product designs that could not be fabricated using conventional processes. This review presents current status of metal AM technologies, fabrication and market prospect of metal powder and challenges of metal applications for industries. Perspective on future strategic research opportunities are also presented for an Additive Manufacturing Age.
        Biography
        Dr. Kang studied metallurgical engineering at the Pusan National University in Korea.
        Since 2014, he has been started to work the 3D Printing Research Organization(3DPRO) for the additive manufacturing within the scope of research activities in the fields of metallic powder.
        For growth and international competitiveness in the additive manufacturing industry, 3D PRO has been endeavor to lead the developments of components, materials and AM products with companies, universities and R&D centers.


    • Product Name : 정세진

      • Overview :

        Sejin Jeong ㅣ Conference 8 SIMTOS 2020 Technical Conference

        Title
        Advanced coating solutions for cutting tools
        Date and Place
        April 1 (Wed.) 2020 | 15:30~16:00 | KINTEX 2, 3F, 308
        Session
        BALIQ AUROS, High-performance coating solutions for threading tools
        BALINIT TISAFLEX, Tailored coating properties for demanding macining applications
        Biography
        Oerlikon Balzers Coating Korea Coating Korea Sales Director

    • Product Name : 임재영

      • Overview :

        Jaeyoung Lim, Country Manager ㅣ Conference 8 SIMTOS 2020 Technical Conference

        Title
        Cutting force simulation and feed-rate optimization
        Date and Place
        April 1 (Wed.) 2020 | 14:50~15:20 | KINTEX 2, 3F, 308
        Session
        Physics-based cutting force simulation and feed-rate optimization analyze NC program and reduce cutting time while protecting cutting machine and tools. it’s not only effective for CNC milling but for lathe and drilling as well.
        Biography
        Country Manager of CGTech Korea

    • Product Name : 조윤태

      • Overview :

        Yuntae Cho Applications Engineer ㅣ Conference 8 SIMTOS 2020 Technical Conference

        Title
        Evolution of Additive Manufacturing – From Prototyping to End-use product.
        Date and Place
        April 1 (Wed.) 2020 | 14:20~14:50 | KINTEX 2, 3F, 308
        Session
        - Introduction of Stratasys’ additive manufacturing technology and products.
        - Improvement of product quality and raise product competitive edge by utilizing additive manufacturing solutions
        - Additive manufacturing application use cases for prototyping and end-use products.
        Biography
        Over 15 years of diverse experience in additive manufacturing/CAD/CAE fields, he is working as an application engineer at Stratasys Korea and using Stratasys’ FDM and PolyJet technologies to develop and provide a variety of solutions to address customers’ issues in various industries.

    • Product Name : 이지훈

      • Overview :

        James Lee ㅣ Conference 8 SIMTOS 2020 Technical Conference

        Title
        3 Scan Based Reverse Engineering and Product Inspection Software Solutions
        Date and Place
        April 1 (Wed.) 2020 | 13:10~13:40 | KINTEX 2, 3F, 308
        Session
        3D scanning technology is being used in various industries such as automotive, electronics, aerospace/defense, shipbuilding, and medical. This session introduces the success stories of reverse design and quality inspection in the product manufacturing process using data from 3D scanners.
        Biography
        - 2004 ~ 2006 Master Degree of Mechanical Engineering, Kyung Hee University
        - 2006 ~ 3D Systems Korea, Korea Sales Director

    • Product Name : 유흥식

      • Overview :

        Hyungcik Yu CEO ㅣ Conference 8 SIMTOS 2020 Technical Conference

        Title
        Demonstration of economic solutions : To build up a manufacturer's Digital-Twin
        Date and Place
        April 1 (Wed.) 2020 | 11:50~12:20 | KINTEX 2, 3F, 308
        Session
        - Introduction of the Standard Specification for the build up a Digital-Twin.
        - Solutions of competitive edge through Digital-Twin platform based on 5G.
        - How to build a Digital-Twin in a Global Manufacturing Environment
        - Innovative Manufacturing System through Decoupling of Manufacturing Environment (ERP/MES is not enough for me)
        - How to develop your own AI Application in the Manufacturing Site
        Biography
        - Ph. D. in Information and Communication Engineering (2014)
        - FVC.com/Senior Engineer (2000~2001)
        - Nexternet Inc./Director of Engineer (2002)
        - JOOHONG Information & Communications Ltd./Director of Research and Development/Director of Research Center(2003~2007)
        - UNOMIC Co.,Ltd./CEO (2006~)

    • Product Name : 이주영

      • Overview :

        Juyoung Lee CEO ㅣ Conference 8 SIMTOS 2020 Technical Conference

        Title
        Digital Twin construction and Manufacturing Process Shortening in Quality Control using Optical 3D Scanner
        Date and Place
        April 1 (Wed.) 2020 | 11:20~11:50 | KINTEX 2, 3F, 308
        Session
        Optical 3D Scanners have developed into an indispensable tool for manufacturing industry as they provide accurate and intuitive information about measured objects and products. This next generation technology lead automation of quality control process and further innovate manufacutring processes. Take a look into how 3D Scanner helped apply the concept of Digital Twin into Quality Control and shorten manufacturing process, and BMW and Volkwagen’s use cases.
        Biography
        B.S in Industrial Engineering and Operations Research, UC Berkeley (2012)
        M.S in Innovation and Technology Management, KAIST (2019)
        President, OMAGOM (2014~present)

    • Product Name : 조계관

      • Overview :

        KyehGwan Cho General Manager ㅣ Conference 8 SIMTOS 2020 Technical Conference

        Title
        Introducing the latest technology for Cross bore deburring.
        Date and Place
        April 1 (Wed.) 2020 | 10:40~11:10 | KINTEX 2, 3F, 308
        Session
        Introduction to cutting deburring technology of 5C Automotive part and deburring and machining technology about Aerospace part which is difficult to machine.
        Biography
        2012 ~ (General manager/Heule Korea)

    • Product Name : 김태원

      • Overview :

        Dr. Taeweon Gim ㅣ Conference 7 Revolutionary Digital Era of Machine Tools II

        Title
        Smart Machines for On-demand Manufacturing
        Date and Place
        April 3(Fri.) 2020 | 11:00~11:30 | KINTEX 2, 3F, 301 ~ 308
        Session
        Today, we live in an increasingly on-demand world. This transformation is happening in the manufacturing industry. The on-demand manufacturing technology makes personalised products with fast delivery possible. When the tool is damaged, the machine replaces the new tool automatically without interrupting the processing. The dedicated tool management function calculates the accumulated cutting time for each tool to record the total tool usage time and manage the tool lifespan. The function notifies users in advance when it is time to replace the tool based on the tool lifespan and optimises machining conditions for each tool through Hwacheon’s unique machining optimization functions.
        Biography
        Taeweon Gim is a director at Hwacheon Machine Tool, leading new machine and new technology development teams. Currently, Dr Gim is focusing on establishing a differentiating strategy to present the high-value added solutions to customers. Dr Gim received bachelor’s degree from Seoul National University in 1988 and PhD from Cranfield University in 1998.

    • Product Name : 조현보

      • Overview :

        Prof. Hyunbo Cho ㅣ Conference 6 Revolutionary Digital Era of Machine Tools I

        Title
        The Brain of Smart Machines: AI and Data Analytics
        Date and Place
        April 2(Thu.) 2020 | 12:00~12:30 | KINTEX 2, 3F, 301 ~ 308
        Session
        The smart machines in the smart factory are equipped with IIoT-enabled sensory and connectivity components which enable to capture and store the status of machine and work-in-process in the form of Big Data. Big Data, structured or unstructured, characterized by multiple sources, real-time velocity, and massive amount, can be processed, visualized, and analyzed for the purpose of improving quality of product, cost of operation, and delivery of finished product. The benefits of dealing with such Big Data can be achieved the four well-defined sequential analytics: Descriptive, Diagnostic, Predictive, and Prescriptive Analytics. Such Industry 4.0 related technologies as Statistics, Machine Learning, Artificial Intelligence, and Optimization are the foundation for successfully creating values from those analytics. In this talk some of challenges and best practices will be presented to help particularly the small to medium manufacturing firms leverage the advanced technologies and analytics.
        Biography
        Dr. Hyunbo Cho is a professor of dept. of industrial and management engineering at the Pohang Univ. of Science and Technology (POSTECH). He received his B.S. and M.S. degrees in Industrial Engineering from Seoul Nat‘l Univ. in 1986 and 1988, respectively, and his Ph.D. in Industrial Engineering with a specialization in Manufacturing Systems Engineering from Texas A&M Univ. in 1993. He was a recipient of the SME’s 1997 Outstanding Young Manufacturing Engineer Award. After joining POSTECH, he has been actively collaborating with National Institute of Standards & Tech. (NIST), USA for the purpose of sharing and developing international standards of smart manufacturing. His areas of expertise include Smart Manufacturing, Industrial Data Engineering and Analytics, Supply Chain Management, and Manufacturing Management and Strategy.

    Speakers
    Speakers

    • Product Name : 형원준

      • Overview :

        Wonjoon Hyoung CDO ㅣ Conference 1 Digital Twin for Smart Manufacturing Innovation

        Title
        Doosan’s Digital Transformation Journey, Digital Twin Strategy and Vision
        Date and Place
        March 31(Tue.) 2020 | 15:25~15:55 | KINTEX 2, 3F, 301 & 302
        Session
        Introducing Digital Transformation Journey of Doosan to design customer experiences with the best digital talent.
        Biography
        Won-Joon Hyoung is leading Doosan’s groupwide Digital Transformation as a CDO and a CIO. He is also head of Doosan Information & Communications BU. Dr. Hyoung was highly recognized for his contribution to the spread of Design Thinking in Korea and excellent leadership and business performance while serving as CEO & president of SAP Korea for approximately 10 years since 2008. Prior to joining SAP, Hyoung led successful business innovation of a leading global company, as President of i2 Technologies, Inc., Korea and Greater Asia-Pacific Region, for 5 years.


    • Product Name : 김진형

      • Overview :

        Chair prof. Jin-Hyung Kim ㅣ Conference 3 Smart Manufacturing Innovation and the Future of the Manufacturing Industry

        Title
        How does ‘Innovation’ Work in Smart Era?
        Date and Place
        April 1(Wed.) 2020 | 10:10~10:50 | KINTEX 1, 3F, Grand Ballroom
        Session
        In the 4th Industrial Revolution, smart technology is more likely to advance in a situation where the machine replaces or help humans. With the accelerating development of artificial intelligence among the technologies, the following deals with how AI can influence the manufacturing and how the innovation of manufacturing can be achieved through this.
        Biography
        - Professor Emeritus, KAIST
        - Ph.D., Aritificial Intelligence field in Computer science, UCLA
        - Former President, Artificial Intelligence Institute
        - Former Director, Software Policy & Research Institute

    • Product Name : dieter klinke

      • Overview :

        Dieter Klinke Director ㅣ Conference 1 Digital Twin for Smart Manufacturing Innovation

        Title
        Where the digital twin meets tomorrow
        Date and Place
        March 31(Tue.) 2020 | 16:00~16:30 | KINTEX 2, 3F, 301 & 302
        Session
        The digital twin has long since established itself in industry, where it’s revolutionizing processes along the entire value chain. As a virtual representation of a product, production process, or performance, it enables the individual process stages to be seamlessly linked. This creates a consistent improvement in efficiency, minimizes failure rates, shortens development cycles, and opens up new business opportunities: In other words, it creates a lasting competitive edge.
        Biography
        Dieter Klinke is Director Marketing Asia Pacific for Siemens Digital Industry Software. He is 24+ years experiences in the Industry Software business in different positions and countries.

    • Product Name : peter rogers

      • Overview :

        Peter Rogers Specialist ㅣ Conference 2 3D Printing & Molding Technology for Smart Manufacturing Innovation

        Title
        Leveraging software in the journey to AM mass production
        Date and Place
        April 1 (Wed.) 2020 | 15:10~15:40 | KINTEX 2, 3F, 301 & 302
        Session
        I will be speaking about the role of software in the additive manufacturing process, and how it can help companies take the technology to mass production volumes. The key points of focus will be Simulation, Design and Automation.
        Biography
        Autodesk Additive Manufacturing Product Specialist

    • Product Name : Masahiko Mori CEO

      • Overview :

        Masahiko Mori CEO ㅣ Conference 4 4th Industrial Revolution and Global Manufacturing Innovation

        Title
        How the Global Manufacturing Corporations are Innovating in the Era of Fourth Industrial Revolution
        Date and Place
        April 2 (Thu.) 2020 | 10:10~11:00 | KINTEX 1, 3F, Grand Ballroom
        Session
        The fourth industrial revolution demands innovation in manufacturing. The innovation arisen from robot cooperation to the smart factory will foresee a huge change in manufacturing. Then‘HOW’are the global manufacturing corporations coping with this innovation? The following discusses the cases of innovation in the global manufacturing corporations and how we need to deal with it.
        Biography
        - Masahiko Mori CEO
        - Japan Machine Tool Builders Association, Vice-President
        - Kyoto University Innovation Capital, President
        - Graduate School of Advanced Leadership Studies, Kyoto University, Professor

    • Product Name : 주영섭

      • Overview :

        Youngsup Joo Chairman ㅣ Conference 1 Digital Twin for Smart Manufacturing Innovation

        Title
        Smart Manufacturing Innovation and Digital Twin
        Date and Place
        March 31(Tue.) 2020 | 13:40~14:00 | KINTEX 2, 3F, 301 & 302
        Session
        This keynote speech will present the strategic direction of the Smart Manufacturing Innovation based on the digital transformation and will also discuss the application of the digital twin in the context of CPS(cyber physical system).
        Biography
        Present) Distinguished Professor, Korea Univ. / Chairman, Korea ICT Convergence Network / Senior Member, National Academy of Engineering of Korea
        Former) SME Minister of Korea / Member, National Economic Advisory Council / Professor, Seoul National Univ. / Managing Director, Office of Strategic R&D Planning & Ministry of Knowledge Economy / President & CEO, Hyundai Autonet / President & CEO, Bontec / Asia Pacific President, GE Thermometrics

    • Product Name : 김태원

      • Overview :

        Dr. Taeweon Gim ㅣ Conference 7 Revolutionary Digital Era of Machine Tools II

        Title
        Smart Machines for On-demand Manufacturing
        Date and Place
        April 3(Fri.) 2020 | 11:00~11:30 | KINTEX 2, 3F, 301 ~ 308
        Session
        Today, we live in an increasingly on-demand world. This transformation is happening in the manufacturing industry. The on-demand manufacturing technology makes personalised products with fast delivery possible. When the tool is damaged, the machine replaces the new tool automatically without interrupting the processing. The dedicated tool management function calculates the accumulated cutting time for each tool to record the total tool usage time and manage the tool lifespan. The function notifies users in advance when it is time to replace the tool based on the tool lifespan and optimises machining conditions for each tool through Hwacheon’s unique machining optimization functions.
        Biography
        Taeweon Gim is a director at Hwacheon Machine Tool, leading new machine and new technology development teams. Currently, Dr Gim is focusing on establishing a differentiating strategy to present the high-value added solutions to customers. Dr Gim received bachelor’s degree from Seoul National University in 1988 and PhD from Cranfield University in 1998.

    • Product Name : Prof. Dr.-Ing. Berend Denkena

      • Overview :

        Prof. Dr.-Ing. Berend Denkena ㅣ Conference 6 Revolutionary Digital Era of Machine Tools I

        Title
        Intelligent Components for Autonomous Machine Tools
        Date and Place
        April 2(Thu.) 2020 | 17:20~18:00 | KINTEX 2, 3F, 301 ~ 308
        Session
        Today's production with customized and specialized machine tools is often unable to achieve this requirement. As a result, autonomous systems that provide more flexible automation and more production freedom, while still maintaining high productivity and robustness regardless of lot size, are needed. Autonomous machine tools have the ability control the production themselves. In addition, the machine tools are able to adapt to unforeseen changes during the process. The basis for this are intelligent components with sensory and actuator capabilities.
        Biography
        Prof. Berend Denkena is Head of the Institute of Production Engineering and Machine Tools at the Leibniz Universität Hannover. After obtaining doctorate at the Faculty of Mechanical Engineering at University of Hannover in 1992, he worked as a design engineer and head of various development groups for Thyssen Production Systems in both Germany and the United States. From 1996 to 2001, he was Head of Engineering and Turning Machine Development at Gildemeister Drehmaschinen in Bielefeld. Since 2001, he has been full professor of Production Engineering and Machine Tools and director of the Institute of Production Engineering and Machine Tools at Leibniz University Hannover.

    • Product Name : yusuf

      • Overview :

        Prof. Yusuf Altintas ㅣ Conference 6 Revolutionary Digital Era of Machine Tools I

        Title
        Digital Machining Twin for Smart Machine Tools
        Date and Place
        April 2(Thu.) 2020 | 10:10~11:00 | KINTEX 2, 3F, 301 ~ 308
        Session
        The aim of digital machining research is to develop mathematical models of metal cutting operations, machine tool vibrations and control. The science-based digital models allow the virtual design, testing, optimization, monitoring and control of machine tools and machining operations. The model predicts the cutting forces, torque and power consumed in machining parts by considering CNC system dynamics, material properties, cutter geometry, structural flexibilities, and cutting conditions along the tool path. The simulation system predicts chatter-free cutting conditions within the work volume of the machine tool or detects the presence of chatter vibrations along the tool path. An in-house developed virtual and real-time CNC system allows the design and analysis of any five-axis machine tool controller. Current research includes digital twin approach, where virtual simulation and real-time machine tool monitoring are integrated to achieve intelligent, self-adjusting smart machine tools.
        Biography
        Professor Altintas worked as a machine tool and manufacturing process development engineer in industry before joining The University of British Columbia in 1986. He conducts research on metal cutting, machine tool vibrations, control and digital machining. He has published about 200 archival journal and 100 conference articles with over 27,300 citations with h index of 87 (Google Scholar), and a widely used “Manufacturing Automation: Principals of Metal Cutting Mechanics, Machine Tool Vibrations and CNC Design. His research laboratory created advanced machining process simulation (CUTPRO), virtual part machining process simulation (MACHPRO) and open-modular 5 axis CNC system (Virtual CNC), which are used by over 300 companies and research centers in the field of machining and machine tools worldwide.
        Professor Altintas is the fellow of Royal Society of Canada, CIRP, ASME, SME, CAE, EC, Tokyo University, P&WC, AvH and ISNM. He received Pratt & Whitney Canada’s (P&WC) university partnership (1997), APEG BC’s Meritorious (2002), APEG BC R.H. McLachlan (2010), UBC Killam Teaching Prize (2011), Gold Medal of Engineers Canada (2011), SME Albert M. Sergent Award (2012), NSERC Synergy Award, ASME Blackall best journal paper award, the scientific award of Turkey in Science and Engineering (2013), Georg Schlesinger Production Engineering Award (Berlin, 2016), and ASME William T. Ennor Manufacturing Technology Award (USA, 2016). He holds an Honorary Doctorate Degrees from Stuttgart University (2009) and Budapest University of Technology (2013), and holds Honorary Professor titles from BEIHANG University in Beijing and University Chair Professor from National Chung Hsing University-Taiwan. He was the past president of CIRP (International Academy of Production Engineering Researchers) for term 2016 – 2017. He is designated as the Distinguished University Scholar of Engineering at the University of British Columbia (2017). He currently directs NSERC CANRIMT Machining Research Network across Canada, and holds the NSERC – P&WC – Sandvik Coromant Industrial Research Chair Professorship to develop next generation Digital Machining Twin Technology.

    • Product Name : jun ni

      • Overview :

        Prof. Jun Ni ㅣ Conference 7 Revolutionary Digital Era of Machine Tools II

        Title
        Industrial AI and Its Applications to Smart Manufacturing
        Date and Place
        April 3(Fri.) 2020 | 10:10~11:00 | KINTEX 2, 3F, 301 ~ 308
        Session
        Artificial intelligence (AI) techniques have been successfully applied in various social and consumer applications, such as voice and image recognitions, social media, advertisement, etc. However, AI techniques have seen limited adoption in industry, primarily due to the difficulty in obtaining adequate sets of training data that are required by various machine learning or neural networks. This presentation will discuss the challenges of adopting AI techniques to industrial applications, and propose a concept of industrial AI (augmented intelligence). Furthermore, experienced operators or engineers accumulated significant knowledge or experience over their professional career. The value behind historical maintenance records should also not be overlooked. Additionally, when sensory data and algorithms are combined with the engineering models, human experience or expert knowledge, and historical records, a new paradigm of industrial AI (iAI) becomes a powerful solution to many industrial problems. Selected applications will be presented to demonstrate the value of this new iAI.
        Biography
        Dr. Jun Ni is the Shien-Ming (Sam) Wu Collegiate Professor of Manufacturing Science and Professor of Mechanical Engineering at the University of Michigan, USA. He served as the founding Dean of the University of Michigan – Shanghai Jiao Tong University Joint Institute located in Shanghai, China since 2006.
        Professor Ni has been invited to serve as a guest/advisory professor at many institutions, including Shanghai Jiao Tong University, Tsinghua University, Xi’an Jiao Tong University, Huazhong University of Science and Technology, Dalian University of Technology, and 10 other institutions. He served in the International Expert Advisory Board of the Ministry of Science and Technology of PRC to consult for the strategic planning in advanced manufacturing.

    • Product Name : Dr. Hitoshi Ohmori

      • Overview :

        Dr. Hitoshi Ohmori ㅣ Conference 6 Revolutionary Digital Era of Machine Tools I

        Title
        Optical Fabrication Technologies with Nanoprecision Machine Tools
        Date and Place
        April 2(Thu.) 2020 | 11:30~12:00 | KINTEX 2, 3F, 301 ~ 308
        Session
        Advanced optics must to be fabricated with nanoprecision on surface and profile. In order to achieve this, nanoprecision machine tools and machining processes must be applied to optical fabrication. In recent years, nanoprecision machine tools which are driven at single nanometric resolution have been developed and moreover, higher resolution toward picoprecision is now being started to be studied.
        For practical application of nanoprecision machine tools, an advanced desktop machine has newly been developed. This machine has 1nm feed resolution, and can mount diamond milling & turning, and also sophisticated grinding capabilities especially with newly developed ion-shot processing. Variety of micro optics can be fabricated on this machine.
        The ion-shot processing can be used both for dressing on nanosurface grinding, and also for surface modification on cutting tools and workpieces enabling direct nanosurface cutting of ferrous materials using diamond tools.

        Biography
        Dr. Hitoshi Ohmori is the Chief Scientist and Director of Materials Fabrication Laboratory of RIKEN. He is also a professor at Graduate School of Saitama University. He got his Bachelor, Master and Doctor degrees of Engineering from Department of Precision Engineering, University of Tokyo in 1986, 1988 and 1991, respectively. He is a Fellow of The International Academy for Precision Engineering (CIRP) and Japan Society of Mechanical Engineering (JSME), and a member of Japan Society of Precision Engineering (JSPE) and Japan Society of Abrasive Technology (JSAT).
        He invented the ELID (Electrolytic In-process Dressing) method enabling effective dressing of fine diamond grinding wheels during his doctorate program at the Graduate School, University of Tokyo, and has been working at RIKEN (The Institute of Physical and Chemical Research) as a research scientist, Vice Chief Scientist, and Chief Scientist of Materials Fabrication Laboratory (MFL) in the field of precision machining, particularly mirror surface grinding with ELID invented by him during the master course and related ultra/nanoprecision machining for more than 25 years.
        He has been developing specific machining processes to improve surface quality and precision through the application of the ELID technique, and has also conducted analytical research on mirror surface generating mechanism by this grinding technique. He received CIRP F.W.Taylor Medal on this achievement. Through his research activities, he has put these new machining techniques based on the ELID method into practical applications for the processing of electronic, optical, medical, and advanced materials.
        He has also been managing projects on the development of ultra/nanoprecision fabrication systems for critical components such as advanced X-ray optical elements, space telescope lenses, sensors, micro-tools, and medical devices. He has provided new achievements and promoted significant development in advanced science and engineering. In recent years, he has eagerly expanding his research fields and interests through working on micro grinding, surface functionalization, and a new cutting process development.

    • Product Name : Prof. Dumitru Nedelcu

      • Overview :

        Prof. Dumitru Nedelcuㅣ Conference 7 Revolutionary Digital Era of Machine Tools II

        Title
        Smart 3D Printing
        Date and Place
        April 3(Fri.) 2020 | 11:30-12:00 | KINTEX 2, 3F, 301 ~ 308
        Session
        During the last years, there has been an increased interest in the use of 3D Printing technologies in many industrial applications and it have been identified as one of the most promising production technologies. Why the 3D Printing is smart? First of all, because at the very beginning the 3D Printing technologies were identified as a segment with high growth potential as well as high performance manufacturing and correspond to high levels of technology maturity. Second one, if we stop printing, different internal components can be perfectly incorporated. Also, can be added sensors, mechanical components such as screws, nuts and even can be reinforced the plastic or biodegradable materials used with different reinforcements even metal reinforcements. The main objective is to identify benchmarks from different industrial branches, based on the criterion of the existing functionality and the companies need.
        Biography
        Dumitru Nedelcu is a Professor at the “Gheorghe Asachi” Technical University of Iasi (TUIASI), Romania, Director of TUIASI Doctoral School and he is involved in fine mechanics and nano-technologies and technologies for obtaining and processing of composite materials. He is the Manager of Fine Mechanics and Nanotechnology Laboratory, President of ModTech Professional Association, ModTech International Conference and Editor-in-Chief of the International Journal of Modern Manufacturing Technologies and Advanced Engineering Forum. He was a Visiting Professor at TAT, Institute of Engineering, Tokyo, Guest Professor at Joining and Welding Research Institute, Osaka University, Japan and Grenoble Institute of Technology, France. He has published more than 170 scientific papers on ISI and BDI journals and international conferences proceedings. He serves on various journals and conferences review committees. The detailed activity can be tracked on the personal webpage, www.dumitrunedelcu.ro.

    • Product Name : Dr. Martin Mares

      • Overview :

        Dr. Martin Mares ㅣ Conference 7 Revolutionary Digital Era of Machine Tools II

        Title
        Smart Machine Tools
        Date and Place
        April 3(Fri.) 2020 | 12:00-12:30 | KINTEX 2, 3F, 301 & 308
        Session
        Improving the basic properties of machines, especially the accuracy and quality of machined surfaces, machining performance and entire manufacturing processes, or the reliability of machines and processes are among the main objectives of development and application of advanced computing and simulations. One of the main challenges of current manufacture is the high degree of product individualisation. In particular, advanced simulation and compensation models help reduce the risk of poor final quality and enable better utilization of the machine's production potential. An appeal to scientific community to disseminate of smart strategies in real industrial environment is actual.
        Biography
        Dr. Martin Mareš is working at Czech Technical University in Prague at Research Center of Manufacturing Technology (RCMT).. Dr. Mareš is an RCMT representative in European Society for Precision Engineering and Nanotechnology (euspen), is a fellow of Czech Association of Engineering Technology (SST), Czech Society for Machine Tools (SPoS) and member of Czech Institute of Informatics, Robotics and Cybernetics (CIIRC). He received his master’s degree from CTU in Prague, Faculty of Mechanical Engineering, Department of Mechanics, Biomechanics and Mechatronics in 2008 and Ph.D. from Department of Fluid Dynamics and Thermodynamics in 2015. In RCMT he has been responsible for the Group of Accuracy.

    고객님들의 생생한 후기를 만나보세요 PHOTO REVIEWS

    포토후기 더보기

    서비스 배너팩1 - 필요가 없으신 경우 삭제가 가능합니다. + 서비스팩 더보기



    WORLD SHIPPING

    PLEASE SELECT THE DESTINATION COUNTRY AND LANGUAGE :

    GO
    close
       




      컨퍼런스 운영사무국

      은행계좌안내

      • 예금주
      • 타이머오늘도 열심히
      • 타이머셋팅까지 완벽하게
      • 타이머사이즈 변경가능


      앗! 화면폭이 너무 좁아요.
      브라우져의 사이즈를 더 늘여주세요~

      좁은 화면으로 보실 때는 모바일 기기에서
      최적화된 화면으로 보실 수 있어요~